1. Pure Sine wave solar inverter with output power factor 1.0 2. PV Input Power Max 8000 W (2 tracker each 4000W) 3. High PV input voltage range 120-450 VDC 4. Built-in integrated MPPT module 120A 5. Battery independent design 6. Built-in anti-dust kit 7. Built-in WiFi for mobile monitoring (Android/iOS Apps available), removable LCD. 8. Parallel operation up to 6 unitsPower system, communication system, railway system, outdoor equipment, etc1.Pure sine wave solar inverter 2.Output power factor 1 3.High PV input voltage range. 4.Built-in MPPT solar controller Battery equalization function to optimize battery performance and extend lifecycle 5.Inverter running without battery 6.Built-in anti-dusk kit for harsh environment 7.Support multiple output priority: UTL, SOL, SBU, SUB 8.WIFI / GPRS remote monitorning ( Optional) 9.RS485 Communication for BMS ( Optional )

Line Mode Specification	VM 1.5K	VM 3K
Rated Output Power	1500VA / 1500W	3000VA / 2400W
Input Voltage Waveform	Sinusoidal(utility or generator)
Nominal Input Voltage	230Vac
Low Loss Voltage	170Vac±7V(UPS)
	90Vac±7V(Appliances)
Low Loss Return Voltage	180Vac±7V(UPS)
	100Vac±7V(Appliances)
High Loss Voltage	280Vac±7V
High Loss Return Voltage	270Vac±7V
Max AC Input Voltage	300Vac
Nominal Input Frequency	50Hz/60Hz(Auto detection)
Low Loss Frequency	40±1Hz
Low Loss Return Frequency	42±1Hz
High Loss Frequency	65±1Hz
High Loss Return Frequency	63±1Hz
Output Short Circuit Protection	Circuit Breaker
Efficiency(Line Mode)	>95%(Rated R load, battery full charged)
Transfer Time	10ms typical(UPS); 20ms typical (Appliances)
Inverter Mode Specifications
Output Voltage Wavaform	Pure Sine wave
Output Voltage Regulation	230Vac±5%
Output Frequency	50Hz
Peak Efficiency	91%
Overload Protection	5s@=150% load;10s@110%-150% load
Surge Capacity	2* rated power for 5 seconds
Nominal DC Input Voltage	12Vdc	24Vdc
Cold Start Voltage	11.5Vdc	23.0Vdc
Low DC Warning Voltage
@load <50%	11.0Vdc	22.0Vdc
@load >50%	10.5Vdc	21.0Vdc
Low DC Warning Return Voltage
@load <50%	11.5Vdc	22.5Vdc
@load >50%	11.0Vdc	22.0Vdc
Low DC Cut off Voltage
@load <50%	10.2Vdc	20.5Vdc
@load >50%	9.6Vdc	20.0Vdc
High DC Recovery Voltage Frequency	14.0Vdc	32Vdc
High DC Cut off Voltage	16.0Vdc	33Vdc
No Load Power Consumption	<25W	<30W
Charging Mode Specifications
Charging Algorithm	3-Step
AC Charging Current (Max)	60Amp	60Amp
Bulk Charging Voltage Flooded Battery	14.6	29.2
	14.1	28.2
Floating Charging Voltage AGM/Gel Battery	13.5Vdc	27Vdc
MPPT Solar Charging Mode
Max PV Array Power	2000w	3000w
Nominal PV Voltage	240Vdc
PV Array MPPT Voltage Range	90-430Vdc
Max PV Array Open Circuit Voltage	450Vdc
Max Charging Current (AC charger plus solar charger)	80Amp	80Amp
Maximum Solar Charging Current	80Amp	80Amp
Safety Certification	CE
Operating Temperature Range	-10℃~50℃
Storage Temperature	-15℃~60℃
Humidity	5% to 95% Relative Humidity(Non-condensing)
Dimension (D*W*H),mm	348*270*95
Net Weight, kg	4		5

Line Mode Specifications	SC-PS3K
Rated Output Power	3KVA / 2.4KW
Input Voltage Waveform	Pure Sine wave
Nominal Input Voltage	230Vac
Low Loss Voltage	170Vac±7V(UPS)
	90Vac±7V(Appliances)
Low Loss Return Voltage	180Va±c7V(UPS)
High Loss Voltage	280Vac±7V